What To Do If Your Toilet Is Clogged?

What To Do If Your Toilet Is Clogged?

There are some people who may call it unlucky, while others call it the stuff of nightmares. No matter how you decide to look at it… a clogged toilet can turn into a very uncomfortable situation, especially if it happens outside of your home. However, with a little creativity, fixing this problem is something you can do without having to worry.

Grab a plunger

While we can all agree that a plunger is a basic tool to have in this situation, it is still considered the best way to get rid of a blocked toilet. With this method, you should get some gloves and goggles if you can. The first thing to do is place the plunger into the bowl over the tiny opening and gently press down, so you can squeeze the air out of the plunger. Do not rush this part or you could end up splashing yourself. Push the plunger up and down without breaking the air seal, then quickly pull the plunger away and break the seal. Water will rush down into that open space and clear the clog.

Stop the water flow

The first thing to do is to stop the water supply, so the water in the bowl does not rise. You can remove the tank lid and close the open flap or you can cut the supply at the valve behind the toilet. Not only will that prevent any spillovers, but it will also give you time to assess the situation before you make your next move. On that note let’s look at a few more tricks that just might come in handy.

Gallon bucket

Many people say that this method is too straight forward that it may not work. However, this is probably one of the easiest and effective methods to fix a clogged toilet. If you have a two or four-gallon bucket at your disposal, just need to fill it with water and pour into the bowl from thigh-height. This force will allow gravity to take over and pull the clog downwards, so things can be up and running in no time. You can also use hot water to increase effectiveness.

Vinegar and Baking soda

This non-toxic method is even more useful when a plunger is not available. Most people know baking soda as a daily cleaning agent, but it can also work wonders when it comes to keeping your drains flowing smoothly, as a blocked drain specialist has specified. The first step is to add a generous quantity of baking soda to the clogged toilet and wait for five minutes. Then you will gradually pour 2 cups of vinegar solution into the bowl and wait for another ten minutes, then flush. The vinegar and baking soda should react and give off bubbles that help to breakdown whatever is clogging the toilet. By this time everything should be flowing freely again.

Liquid soap

No bucket? No problem! Before doing anything else, set a gallon of water on the stove to boil. While that’s going on, you can search for some dishwashing liquid, shampoo, or liquid hand soap. Pour it into the clogged bowl and pour the hot water afterward. Wait for 20 seconds, then flush. This extreme heat should soften the clog and allow it to break apart and move down easily with the help of the soap.

What To Do If Your Toilet Is Clogged?

Call a certified plumber

When you have exhausted all the options above, the next best thing is to call the professionals such as regular plumbers or even one of the plumbing engineering companies in Australia. Even though this may come at a cost, and it may take more time, at least you can be sure that he will be able to get rid of that stubborn clog.

It’s always good to have several options on hand because you never know when one of them may come in handy. Most of the things used here can be found in and around the house, so it’s just a matter of using what you have. 

Diagnosing A Blocked Drainage

There are few plumbing problems more disconcerting than a blocked or malfunctioning toilet. For such a vital piece of household engineering, it’s surprising how often we take toilet technology for granted, and only really notice it when it breaks down. In this article, we’ll be taking a closer look at various examples of toilet troubleshooting, so you’re better equipped to identify and manage issues when they arise.

Low water level

If you flush and the water level in the bowl drops significantly afterwards you may have a cracked or clogged bowl. A clog of toilet paper that is siphoning water away from the bowl is the most likely cause of a low water level. If this is the case, it can be removed either manually or with a plunger. Another possible cause of the low water level is a cracked bowl which is leaking. If this is the case, the bowl will need to be replaced by a professional.

Slow drainage

Toilets that take a long time to drain after flushing may have a partial or full clog further along the plumbing line. Try filling a bucket with water and pour it into the toilet quickly. If it’s a partial blockage, the pressure of the water you’re pouring into the bowl should help it move through, but if the water fills up in the bowl and drains slowly, it’s a more complete clog which will need plunging or possibly even professional intervention if the blockage is further down the line.

Suction sounds in other drains

Gurgling sounds coming from the sink or shower drain is a sign that the pipes aren’t properly vented and there is air passing through the other pipelines. Venting problems are usually caused by blockages in the shared vent pipe and it’s best to call in a professional to manage issues like these. In some cases, it might even be wise to have a plumbing engineering consultation to determine the best methods to take which does not disrupt the whole vicinity. A slow water flow, exposure to sewerage gases, and serious blockages can occur if this problem isn’t seen to with some urgency.

Whistling tank

If you have a tank that whistles after you flush, then it’s simply a sign of old technology where a ball float is used to close the water valve as the tank fills up. This isn’t a problem unless you find the noise irritating, in which case, it is possible to replace the tank with newer technology.

One thought on “What To Do If Your Toilet Is Clogged?”

Leave a Reply

Your email address will not be published. Required fields are marked *

Read previous post:
designers
The Process of Working with an Interior Designer

Generally, the necessary process of designing a space includes planning and assessment. Other methods are budget, procurement, installation, and the...

Close